CRANKSHAFT SCOOTER DOPPLER ENDURANCE FOR TYPHOON/NRG/ZIP/FLY/STALKER/RUNNER -2 STROKE
Ref. : 441281
| Connecting rod mass | Pleine |
| Right silk diameter in mm | 20 |
| Left silk diameter in mm | 20 |
| Forged connecting rod | Oui |
| Connecting rod length in mm | 80 |
| Needle cage supplied | Oui |
| Bearings supplied | Non |
| Piston pin diameter in mm | 12 |
| Spare part needle cage | 324278 |
| left bearing | 191584 |
| Spare part right bearing | 191584 |
| Spare part bearing kit | 478937 |
It is machined from the solid and ground with an aluminium balance plug reducing dead volumes in the engine bottom end while ensuring maximum balance and good inertia. It has a removable, forged lightweight INA racing big-end bearing that can whistand up to 18000 rpm. The crankpin has a diameter of 18 mm compared with 16 mm for the standard part.
- GILERA DNA 50 AC (50 cc)
- GILERA DNA 50 LC (50 cc)
- GILERA RUNNER 2T (50 cc)
- GILERA STALKER (50 cc) From 2005 to 2011
- GILERA STALKER (50 cc)
- PIAGGIO FLY 2T (50 cc)
- PIAGGIO TYPHOON 2T (50 cc) From 1993 to 1997
- PIAGGIO TYPHOON 2T (50 cc) From 2010 to 2016
- PIAGGIO TYPHOON 2T (50 cc)
- PIAGGIO ZIP 2T AC (50 cc) From 2009 to 2015
- PIAGGIO ZIP 2T AC (50 cc)
- PIAGGIO ZIP 2T LC (50 cc) From 2006 to 2013
- PIAGGIO ZIP 2T LC (50 cc)
Gross weight :
1,344 kg
1,344 kg
Length :
0.282 m Width :
0.126 m Height :
0.094 m
0.282 m Width :
0.126 m Height :
0.094 m
Volume :
0.00334 m³
0.00334 m³
