FRAME PROTECTION CLEARPROTECT BMX SHINY FINISH

This polyurethane adhesive film is super strong and very discreet.
Used in the aeronautics industry, this material is known to resist abrasion and impacts.
Clear Protect does not yellow, does not peel off and protects the different parts of the bike very effectively against scratches, impacts, rubbing, etc...
Easy to apply and cut to the desired length, it has been adopted by many riders throughout Europe.
Composition of the pack :
- 1 down tube guard - 590 x 60 mm
- 2 rear seat protectors - 247 x 50 mm
- 2 seatstay protectors - 287 x 50 mm
- 2 sheathing protections - 35 x 50 mm
Installation instructions:
To be cut as required.
Clean the frame. Moisten the adhesive part of the film with Clearshine and place it on the surface to be protected.
Remove excess product gently with the felt provided in the kit.
Caution: For all painted surfaces, only apply to original, undamaged paint.
If the paint is not original or/and damaged, installation and removal is at the discretion/risk of the installer.
Product manufactured and packaged in France. https://youtu.be/lbzj6hPDrFI