FRAME PROTECTION CLEARPROTECT PACK L SHINY FINISH

This polyurethane adhesive film is super strong and very discreet. Used in aeronautics, this material is known to resist abrasion and impacts.

Clear Protect does not yellow, does not peel off and very effectively protects the different parts of the bike against scratches, shocks, friction, etc.

Easy to install and cut to the desired lengths, it has been adopted by many riders across Europe.

Pack composition:
- 1 diagonal tube protection - 590 x 100 mm
- 1 horizontal tube protection - 590 x 60 mm
- 1 rear chainstay protection (chain side) - 287 x 50 mm
- 1 seat tube protection - 210 x 50 mm
- 2 seat stay protections - 288 x 50 mm
- 2 cable routing protections - 35 x 50 mm

Installation advice:
Clean the frame.

Moisten the adhesive part of the film with Clearshine installation product and position it on the surface to be protected.

Gently remove excess product with the felt provided in the kit.

Warning:
For any painted surface, only install on original, undamaged paint.

If the paint is not original and/or damaged, installation and removal is at the discretion/risk of the installer.

Product manufactured and packaged in France.