IGNITION COVER REVERSIBLE KRM PRORIDE FOR AM6 - BLACK/TURQUOISE

Made on a black 3D printed base, the KRM pro ride casing is modular since it allows different aesthetic and technical combinations.

First of all, the aluminum part is reversible to allow you to choose which engraving goes best with the vehicle.

Then, the part located between the base of the housing and the aluminum cover is made of transparent plexiglass, which allows it to remain watertight while allowing the ignition to appear in operation.

Finally, the open mounting option, which involves removing the plexiglass and inserting the 2mm black shim between the base of the housing and the aluminum cover.
This non-watertight option allows for greater ventilation of the ignition.

The casings must be assembled using the M3 screws and nuts delivered with the pack.
The 6 M3 nuts are to be placed in the 6-sided sockets located inside the casing.
The screws and washers for mounting the crankcase to the engine are also delivered.

• RIEJU MRT EURO 5 V1 (50 cc) From 2021 to 2021